| 物品名称 | 规格型号 | 数量 | 单位 | 描述 |
| 鹅颈阀门 | 详见规格 | 33.00 | 个 | {"规格型号":"349614-0041/IR-3D","公称压力":"4MPa","公称通径":"DN89mm","连接方式":"法兰连接","驱动方式":"点击登录查看","适用电压":"点击登录查看","气源压力/液体压力":"点击登录查看","反馈信号":"点击登录查看","是否配带执行机构":"点击登录查看","执行机构型号":"点击登录查看","执行机构与阀门连接尺寸":"点击登录查看","工作温度":"371℃","输送介质":"蒸汽 水","材质":"铸钢","国产/进口":"国产","特殊要求":"1.尺寸要求:下部法兰外径:192mm,内径89mm,上部法兰外径118mm,内径50mm.2.原生产厂家:湖北戴蒙德电力机械有限公司.3.配有压力调节盘,可调节低压介质的压力和流量.4.适用于IR-3D型炉膛吹灰器.5.不合格品处理标准:如到货不符合技术要求,由供应商点击登录查看条件进行更换,退货处理.","使用寿命":"365天","参照标准":"JB/T 8501-1996","备注":"按要求完善选项参数"} |
| 圆风门 | 详见规格 | 2.00 | 个 | {"规格型号":"DN1400","公称压力":"0.003MPa","公称通径":"1400mm","连接方式":"法兰连接","密封方式":"石棉盘根密封","驱动方式":"手动","适用电压":"点击登录查看","气源压力/液体压力":"点击登录查看","反馈信号":"点击登录查看","是否配带执行机构":"否","执行机构型号":"点击登录查看","执行机构与阀门连接尺寸":"30*30*45mm","工作温度":"≤400℃","输送介质":"风粉混合物","主体材质":"16Mn","内衬材质":"点击登录查看","国产/进口":"国产","特殊要求":"风门内径1400±5mm,高度300±5mm,门框厚度≥16mm,挡板厚度≥16mm,法兰厚度≥18mm,法兰宽度≥80mm,两侧法兰各有28个Ф25mm的孔均布,孔中心距165mm,孔中心距法兰边缘≥30mm,门框材质16Mn,挡板材质1Cr13,门轴材质304不锈钢,风门间隙配合适当以保证运行中能够灵活开关不出现卡涩现象,如到货与技术要求不符,由供应商点击登录查看条件进行退,换货处理","使用寿命":"≥1460天","参照标准":"GB/T 12238-2008","备注":"风门内径1400±5mm,高度300±5mm,门框厚度≥16mm,挡板厚度≥16mm,法兰厚度≥18mm,法兰宽度≥80mm,两侧法兰各有28个Ф25mm的孔均布,孔中心距165mm,孔中心距法兰边缘≥30mm,门框材质16Mn,挡板材质1Cr13,门轴材质304不锈钢,风门间隙配合适当以保证运行中能够灵活开关不出现卡涩现象,如到货与技术要求不符,由供应商点击登录查看条件进行退,换货处理"} |
| 自密封 | 详见规格 | 6.00 | 个 | {"规格型号":"Ф299*266*40/45°","材质":"柔性石墨/内夹镍网","公称压力":"19Mpa","适用温度":"≤540℃","适用介质":"水、蒸汽","阀门配件序列号":"点击登录查看","阀门规格":"SD61H-P54-19V/DN250","国产/进口":"国产","生产厂家":"任意生产厂家","特殊要求":"到货后如不符合技术要求或表面破损、变形,供应商应点击登录查看条件给予更换、退货","使用寿命":"365天","参照标准":"JB/T 6617-2016"} |
| 针型阀 | 详见规格 | 20.00 | 个 | {"规格型号":"J13W-160P/M20*15","公称压力":"16MPa","公称通径":"15mm","连接方式":"螺纹连接","丝扣连接尺寸":"内螺纹，两种不同连接G1/2-M20*1.5","工作温度":"-29~538℃","输送介质":"天然气","主体材质":"304不锈钢","国产/进口":"国产","特殊要求":"点击登录查看","使用寿命":"1825天","参照标准":"GB/T 12224-2015"} |
| 蜗轮蝶阀 | 详见规格 | 2.00 | 个 | {"规格型号":"D371X-16/DN80","公称压力":"1.6MPa","公称通径":"80mm","连接方式":"对夹式","驱动方式":"涡轮","工作温度":"-15~150℃","主体材质":"铸铁","内衬材质":"氟橡胶","国产/进口":"国产"} |
当前位置：
